Self-Propelled Lifting Platfrom Made in China Cheap Price for sale

1. The lifting platform has been inspected and debugged at the factory before delivery. All the technical indexes have reached the design requirements. When using, the lifting platform only needs to be connected with the power supply, and the hydraulic system and electrical system need not to be adjusted.

2. The platform should be carefully checked before use of hydraulic, electrical systems, no leakage or naked leakage before use.

3. Lifting platform in use, the four legs should be firmly supported on a solid ground (with the wheel to leave the ground shall prevail) if necessary, the use of sleepers.

4. Lifting platform empty run 1-3 times before loading operation.

5 load center of gravity should be as far as possible in the center of the table.

6.Guard railings at both ends of the movable door should be locked after the lock operation.

1, Maintenance introduction
a. Wheels, countershafts and bearings, cylinder pin and bearing, jib hinge shaft and bearing wear.
b. All parts are filled with some lubricants to extend the service life of bearings.
c. Hydraulic oil and oil level. Lifting platform throughout the rise, in this position, the hydraulic floor should be higher than the bottom 40 to 50 mm. If it is found that the hydraulic oil is dark, sticky or gravel and other foreign objects should be promptly replaced (winter replacement 32 # hydraulic oil, summer 46 # hydraulic oil. In particularly cold northeast, should be replaced transformer hydraulic oil).

2, Mid-year inspection
a, According to the order of six months or 500 hours prioritized.
b, The whole platform will rise and fall, into a brace.

1.Loading capacity----200KG, 250KG OR 300KG......?

2. The size of the table-----?

3. Working height------3m, 6m, 10m, 12m......?

4. Driving mode ----Diesel engine or Hydraulic or Electric or Battery ?

5.Fixed type (without wheel) or Trolley (with wheel) ?

stationary hydraulic scissor lift platform is a kind of good stability, wide applicability of cargo lifting equipment. Self-Propelled Lifting Platfrom Made in China Cheap Price for sale used in the production line,automatic production line for the delievery of goods,material online or offline,workpiece assembly lifting operation.stationary hydraulic scissor lift According to the different job requirements and the environment Self-Propelled Lifting Platfrom Made in China Cheap Price for sale can be configured using various forms of workbench, dynamic form and other additional accessories.
JHJGHGJ
Self-Propelled Lifting Platfrom Made in China Cheap Price for sale offered find high suitability for lifting heavy loads to higher heights and can achieve maximum lift height of 40 feet (12 m). We make these available in operational capacity range from 200 kg to 30000 kg and in superior finish standards that make these easily handle movement of loads to different levels. stationary hydraulic scissor lift Offering easy loading and unloading interface, these lifts can also be custom built in different sizes & capacities as demanded by the customers.