CGF2800X 10kw air-cooled diesel generator

CGF2800X 10kw air-cooled diesel generator

CGF2800X 10kw air-cooled diesel generator description:

Application:

CGF2800X 10kw air-cooled diesel generator mainly apply to field operation power generation, mobile and portable power generation.

Feature:

• Constant voltage AVR control germany technology
• Heat insulation F class insulation heat resistant 155 citi degree
• Security intelligence smart oil alarm automatic locking waterproof plug
• Portable, pure copper motor, thickening frame

The detail technical datas of CGF2800X 10kw air-cooled diesel generator

Different kinds of diesel generator sets

If you are interested in knowing more details, or the CGF2800X 10kw air-cooled diesel generator messages, please click on the product in the picture or the following link:

https://cg-dl.en.CGF2800X 10kw air-cooled diesel generator.com/?spm=a2700.7756200.1998619056.12.jDryWD.

Details of CGF2800X 10kw air-cooled diesel generator

Black smoke

1. Over load of diesel engine.

2. Oil supplying time is too late.

3. Too excessive oil supply.

4. Poor atomization of injector.

5. Poor compression (leakage of air valve, cylinder sleeve or cylinder gasket)

6. Clogging of inlet or exhaust pipe.

7. Too large gap between air valves, and the opening of air valve is too small.

8. Too much deposited carbon in combustion chamber.

9. Oil pressure is insufficient, CGF2800X 10kw air-cooled diesel generator to burning and clasping of bearings.

10. Pull cylinder, and pull piston are broken.

Blue smoke

The gap between piston and sleeve is too large and replaced piston can’t match cylinder sleeve.

1. Oil ring is stuck in track, causing piston rings arrange in same line, or broken, or seriously scuffed, CGF2800X 10kw air-cooled diesel generator the opening of oil ring is too big.

2. Heavy scuffing on air valve rod and air valve guide.

3. Oil surface is too high on the bottom of engine.

4. Oil surface of oil pan in filter is too high.

5. Diesel is mixed with engine oil.

White smoke

1. Water is mixed in diesel.

2. Cylinder head gasket is broken or the surface of cylinder head has notches, making the cooling seepg into the cylinders.

3. The temperature of engine is too low, and it is put on load without preheating.

4. When diesel engine is started with empty load after being cooled, due to poor injector atomization, excessive spray of oil and other reasons, the diesel in the cylinder can’t be complete combusted, this part of diesel turn into a white gas, and then discharged by the exhaust pipes.

Why does abnormal sound occur in the operation of engine?

1. Too large sir valve gap.

2. Too large gap between air valve rod and valve guide.

3. Two small air valve gap or too high air valve seat, causing air valve to hit piston.

4. Valve guide is broken.

5. Serious leakage of air valve.

6. Cylinder head gasket or installment point of injectors leaks air.

7. Internal barriers of silencer or internal pipe with holes fall or break.

8. Too large gap between piston and cylinder sleeve.

9. Too large gap between piston pin and copper linings.

10. Two early supply of oil.

11. Two late supply of oil.

12. Two large gap between connecting rod neck and connecting rod bearing, main bearing and main bearing neck.

13. Connecting rode bolt is loose.

14. Head of connecting rod neck collides with upper and lower balance bearings and connecting rod neck collides with cam.

15. Axial clearance of crankshaft is too large.

16. Flywheel is loose.

17. Upper and lower balance bearing are loose.

18. Gear gaps are too big, gap between sleeve and couple are too large.

19. Inlet and exhaust of camshaft has serious scuffing, and rising life is lowered too much, there are notches on the contact surface of air valve tappet with cam, which reduce the opening degree of air valve, and cause the sound “pa pa” happens.

Why does cooling tank have engine oil and black carbon?

1. There are cracks on the cylinder head and engine body.

2. Water seal ring of cylinder sleeve is broken.

3. Cylinder gasket is uneven in thickness or damaged.

4. Water head of cylinder is damaged.

Why is engine temperature too high and why is it easily to boil cooling water?

1. The gap between every moving parts is too nCGF2800X 10kw air-cooled diesel generator, and galling effects occurs.

2. Poor lubrication

3. Too much deposited carbon in combustion chamber reduce heat dissipation

4. Incrustation in water tank is too thick, and water channel is blocked, affecting heat dissipation.

5. Lack of water

6. Too late supply of oil

7. Diesel engine operates overloaded.

8. Poor atomization of injector cause diesel engine emits black smoke.

9. Poor ventilation and high environmental temperature affects diesel heat dissipation.

The air-cooled diesel generator can have optional wheels and hand kits, Electric start or manual starting.Small-sized diesel generator sets includes open type and silent type.Our CGF2800X 10kw air-cooled diesel generator adopt different diesel engines and brushless generators.Generally adopt 1-cylinder&4-stroke&air-cooled engine, low fuel consumption, high reliability;It is easy to maintain as adopting brushless A.C.Generator and CDI ignition system.
JHSBJDHV
air-cooled diesel generator are quick-starting, stable-running, little vibration, low noise, light weight, small volume, compact structure, suitable for areas on mining, factory, working on field, engaging in construction and army as movable power or electric power in ship, CGF2800X 10kw air-cooled diesel generator also suitable for areas on animal husbandry, fishery, forest, orchard, guesthouse and business as standby power.
JSHFDKJ